OptInt PmWiki : MROI Delay Line / Draft Test List

Tests for FDR

Need to check if the following is consistent with DFB's list.

Before tests: ensure all software used for tests has been committed to the subversion repository.

  1. Check velocity ramping under VME control by moving fixed distances (plus and minus): 4mm, 10mm, 20mm, 50mm 100mm 200mm 500mm 2m.
  2. Test tracking at rates of (plus and minus) 0.1mm/s, 0.2mm/s, 0.4mm/s, 0.8mm/s and then 1 to 15mm/s in increments of 1mm/s.
  3. Test tracking at constant accelerations up to 1.25 micron/s^2. Test reversing direction while tracking.
  4. Test response to fringe tracking offsets.
  5. Repeat two constant velocity tracking tests (1mm/s and 10mm/s) with steering loop closed and actuating (may need to force actuation). After metrology alignment:
  6. Check slewing and tracking for a subset of above velocities.
  7. Check shear loop operation.
  8. Repeat tracking tests with all loops closed.



Attachments for MROIDelayLine.DraftTestList

Click here to upload file to attach to this page.

(Printable View of http://www.mrao.cam.ac.uk/projects/OAS/pmwiki/pmwiki.php/MROIDelayLine/DraftTestList)