Return to Doc Man  (Edit)

MROIFastTipTilt.DocMan History

Hide minor edits - Show changes to output

August 02, 2017, at 05:01 PM by jsy1001 -
Changed line 121 from:
!!!Assembly procedures
to:
!!!Assembly and integration procedures
Added line 125:
* INT-403-TSP-0108 FTT/NAS #1 pre-SAT Software Requirements
August 01, 2017, at 09:33 AM by jsy1001 -
Changed lines 117-119 from:
* TBD FTT/NAS Stability Test Report
* TBD FTT/NAS Camera Enclosure Factory Test Report
* TBD FTT/NAS Closed-loop Test Report
to:
* MRO-TRE-CAM-1100-0185 FTT/NAS Stability Test Report
* MRO-TRE-CAM-1140-0186 FTT/NAS Camera Enclosure Factory Test Report
* MRO-TRE-CAM-1100-0187 FTT/NAS Closed-loop Test Report
July 28, 2017, at 06:41 PM by jsy1001 -
Changed lines 79-80 from:
to:
* MRO-MAN-CAM-1160-0184 Software Developer Manual (in prep)
Added lines 114-115:
* (MRO-TRE-CAM-1100-0168 FTT/NAS Performance Test Report -- replaced by Stability Test Report)
* MRO-PLA-CAM-1100-0178 FTT/NAS SAT Requirements
Changed lines 117-118 from:
* MRO-TRE-CAM-1100-0168 FTT/NAS Performance Test Report (in prep)
* MRO-PLA-CAM-1100-0178 FTT/NAS SAT Requirements
to:
* TBD FTT/NAS Stability Test Report
* TBD FTT/NAS Camera Enclosure Factory Test Report
* TBD FTT/NAS Closed-loop Test Report
July 14, 2017, at 03:49 PM by jsy1001 -
Changed line 114 from:
* MRO-TRE-CAM-1100-0168 FTT/NAS Performance Test Report
to:
* MRO-TRE-CAM-1100-0168 FTT/NAS Performance Test Report (in prep)
Changed line 130 from:
Attached to [[FTTPriv:TechnicalNotes]]
to:
Attached to [[FTTPriv:TechnicalNotes]] (restricted access)
July 14, 2017, at 03:46 PM by jsy1001 -
Added line 120:
* MRO-PRO-CAM-1100-0183 FLC/FTT VCMF Install Requirements
July 14, 2017, at 03:44 PM by jsy1001 -
Added line 111:
Attached to [[AcceptanceTests]]
March 27, 2017, at 11:55 AM by jsy1001 -
Changed lines 108-109 from:
* MRO-COR-CAM-0000-0176 December 2016/January 2017
* MRO-COR-CAM-0000-0177 February/March 2017
to:
* MRO-COR-CAM-0000-0176 December 2016 & January/February 2017
December 01, 2016, at 12:25 PM by jsy1001 -
Changed lines 107-109 from:
* MRO-COR-CAM-0000-0175 July/August 2016
* MRO-COR-CAM-0000-0176 September/October 2016
* MRO-COR-CAM-0000-0177 November/December 2016
to:
* MRO-COR-CAM-0000-0175 August/September/October/November 2016
* MRO-COR-CAM-0000-0176 December 2016/January 2017
* MRO-COR-CAM-0000-0177 February/March 2017
August 11, 2016, at 08:54 AM by 77.128.113.157 -
Added line 113:
* MRO-TRE-CAM-1200-0183 First Light Camera Acceptance Test Results
April 29, 2016, at 03:03 PM by jsy1001 -
Changed lines 104-109 from:
* MRO-COR-CAM-0000-0172 December 2015/January 2016
* MRO-COR-CAM-0000-0173 February/March 2016
* MRO-COR-CAM-0000-0174 April/May 2016
* MRO-COR-CAM-0000-0175 June/July 2016
* MRO-COR-CAM-0000-0176 August/September 2016
* MRO-COR-CAM-0000-0177 October/November 2016
to:
* MRO-COR-CAM-0000-0172 December 2015/January/February 2016
* MRO-COR-CAM-0000-0173 March/April 2016
* MRO-COR-CAM-0000-0174 May/June 2016
* MRO-COR-CAM-0000-0175 July/August 2016
* MRO-COR-CAM-0000-0176 September/October 2016
* MRO-COR-CAM-0000-0177 November/December 2016
April 19, 2016, at 05:26 PM by jsy1001 -
Changed line 78 from:
* MRO-MAN-CAM-1210-0182 FLC Quickstart Guide
to:
* MRO-MAN-CAM-1210-0182 FLC Quick Start Guide
April 19, 2016, at 04:50 PM by jsy1001 -
Changed line 68 from:
Kept in our software repository.
to:
Kept in our software repository, with copies attached to [[InterfaceControl]]
Changed line 73 from:
Kept in our subversion repository.
to:
Kept in our subversion repository, with copies attached to [[Manuals]]
Added line 117:
Attached to [[Manuals]]
April 19, 2016, at 04:35 PM by jsy1001 -
Added line 78:
* MRO-MAN-CAM-1210-0182 FLC Quickstart Guide
April 04, 2016, at 05:03 PM by jsy1001 -
Added lines 115-117:
!!!Assembly procedures
* MRO-PRO-CAM-1200-0180 First Light Camera Assembly Procedure
Added line 123:
* MRO-TRE-CAM-1200-0181 First Light Camera Description
March 10, 2016, at 01:49 PM by jsy1001 -
Added line 134:
* MRO-TEN-CAM-1160-0179 Interfacing the FTT-NAS to the UTM
November 05, 2015, at 02:53 PM by jsy1001 -
Added line 68:
Kept in our software repository.
Changed lines 102-109 from:
to:
* MRO-COR-CAM-0000-0171 October/November 2015
* MRO-COR-CAM-0000-0172 December 2015/January 2016
* MRO-COR-CAM-0000-0173 February/March 2016
* MRO-COR-CAM-0000-0174 April/May 2016
* MRO-COR-CAM-0000-0175 June/July 2016
* MRO-COR-CAM-0000-0176 August/September 2016
* MRO-COR-CAM-0000-0177 October/November 2016
Added line 113:
* MRO-PLA-CAM-1100-0178 FTT/NAS SAT Requirements
October 15, 2015, at 10:06 AM by jsy1001 -
Added line 100:
* MRO-COR-CAM-0000-0170 June/July/August/September 2015
June 08, 2015, at 10:50 AM by jsy1001 -
Changed line 99 from:
* MRO-COR-CAM-0000-0169 March/April 2015
to:
* MRO-COR-CAM-0000-0169 March/April/May 2015
May 29, 2015, at 10:45 AM by 131.111.48.85 -
Added lines 98-99:
* MRO-COR-CAM-0000-0160 January/February 2015
* MRO-COR-CAM-0000-0169 March/April 2015
February 09, 2015, at 05:08 PM by 131.111.48.85 -
Added line 101:
* MRO-TRE-CAM-1100-0168 FTT/NAS Performance Test Report
September 05, 2014, at 06:32 PM by jsy1001 -
Added lines 98-100:

!!!Testing procedures and reports
* MRO-PRO-CAM-1200-0167 First Light Camera Test Procedure
August 08, 2014, at 09:57 AM by jsy1001 -
Added line 76:
* MRO-MAN-CAM-1161-0166 The dlmsg FITS convention
August 05, 2014, at 03:25 PM by jsy1001 -
Added line 75:
* MRO-MAN-CAM-1160-0165 Software User Manual
August 05, 2014, at 11:30 AM by 131.111.48.85 -
Changed lines 93-94 from:
* MRO-COR-CAM-0000-0157 April/May 2014
* MRO-COR-CAM-0000-0158 June/July 2014
to:
* MRO-COR-CAM-0000-0157 April/May/June/July 2014
* MRO-COR-CAM-0000-0158 August/September 2014
* MRO-COR-CAM-0000-0159 October/November 2014
February 06, 2014, at 11:39 AM by 131.111.48.85 -
Changed lines 91-94 from:
* MRO-COR-CAM-0000-0155 October/November 2013
* MRO-COR-CAM-0000-0156 December 2013/January 2014
* MRO-COR-CAM-0000-0157 February/March 2014
* MRO-COR-CAM-0000-0158 April/May 2014
to:
* MRO-COR-CAM-0000-0155 October 2013 to January 2014
* MRO-COR-CAM-0000-0156 February/March 2014
* MRO-COR-CAM-0000-0157 April/May 2014
* MRO-COR-CAM-0000-0158 June/July 2014
December 18, 2013, at 02:42 PM by jsy1001 -
Added line 72:
Kept in our subversion repository.
December 18, 2013, at 02:41 PM by jsy1001 -
Added line 73:
* MRO-MAN-CAM-1160-0164 Software Build System
December 17, 2013, at 04:53 PM by jsy1001 -
Added lines 70-72:

!!!Deliverable Software Documentation
* MRO-MAN-CAM-1160-0163 Software Release Notes
July 31, 2013, at 10:33 AM by jsy1001 -
Changed lines 84-89 from:
* MRO-COR-CAM-0000-0153 March/April 2013
* MRO-COR-CAM-0000-0154 May/June 2013
* MRO-COR-CAM-0000-0155 July/August 2013
* MRO-COR-CAM-0000-0156 September/October 2013
* MRO-COR-CAM-0000-0157 November/December 2013
* MRO-COR-CAM-0000-0158 January/February 2014
to:
* MRO-COR-CAM-0000-0153 March to July 2013
* MRO-COR-CAM-0000-0154 August/September 2013
* MRO-COR-CAM-0000-0155 October/November 2013
* MRO-COR-CAM-0000-0156 December 2013/January 2014
* MRO-COR-CAM-0000-0157 February/March 2014
* MRO-COR-CAM-0000-0158 April/May 2014
April 23, 2013, at 04:37 PM by jsy1001 -
Changed lines 91-92 from:
!!!Technical Reports
to:
!!!Other Technical Reports
Attached to [[DesignDocuments]]
April 18, 2013, at 04:25 PM by jsy1001 -
Added line 94:
* MRO-TRE-CAM-1120-0162 Andor iXon X3 897 Custom Clocking Evaluation II
March 20, 2013, at 01:11 PM by jsy1001 -
Changed lines 83-89 from:
* MRO-COR-CAM-0000-0152 December 2012/January 2013
* MRO-COR-CAM-0000-0153 February/March 2013
* MRO-COR-CAM-0000-0154 April/May 2013
* MRO-COR-CAM-0000-0155 June/July 2013
* MRO-COR-CAM-0000-0156 August/September 2013
* MRO-COR-CAM-0000-0157 October/November 2013
* MRO-COR-CAM-0000-0158 December 2013/January 2014
to:
* MRO-COR-CAM-0000-0152 December 2012 & January/February 2013
* MRO-COR-CAM-0000-0153 March/April 2013
* MRO-COR-CAM-0000-0154 May/June 2013
* MRO-COR-CAM-0000-0155 July/August 2013
* MRO-COR-CAM-0000-0156 September/October 2013
* MRO-COR-CAM-0000-0157 November/December 2013
* MRO-COR-CAM-0000-0158 January/February 2014
December 19, 2012, at 02:31 PM by 131.111.48.85 -
Deleted line 59:
** [[Attach:SoftwarePreliminaryDesignReportOutline.pdf | Outline]]
Changed lines 82-84 from:
* MRO-COR-CAM-0000-0151 August/September 2012
* MRO-COR-CAM-0000-0152 October/November 2012
to:
* MRO-COR-CAM-0000-0151 August/September/October/November 2012
* MRO-COR-CAM-0000-0152 December 2012/January 2013
* MRO-COR-CAM-0000-0153 February/March 2013
* MRO-COR-CAM-0000-0154 April/May 2013
* MRO-COR-CAM-0000-0155 June/July 2013
* MRO-COR-CAM-0000-0156 August/September 2013
* MRO-COR-CAM-0000-0157 October/November 2013
* MRO-COR-CAM-0000-0158 December 2013/January 2014
Added line 93:
* MRO-TRE-CAM-1130-0161 FTT/NAS Optical Coatings
July 31, 2012, at 12:16 PM by jsy1001 -
Changed lines 82-84 from:
* MRO-COR-CAM-0000-0129 February/March 2012
* MRO-COR-CAM-0000-0130 April/May 2012
* MRO-COR-CAM-0000-0150 June/July 2012
to:
* MRO-COR-CAM-0000-0150 May/June/July 2012
March 15, 2012, at 01:31 PM by 131.111.48.85 -
Added line 51:
Attached to [[InterimReport]]
Added line 56:
Attached to [[PreliminaryDesignReview]]
Added line 58:
** [[Attach:PreliminaryDesignReportOutline.pdf | Outline]]
Changed lines 60-62 from:
to:
** [[Attach:SoftwarePreliminaryDesignReportOutline.pdf | Outline]]
* MRO-LIS-CAM-0000-0144 PDR Data Package List
Added line 103:
* MRO-TEN-CAM-1140-0136 FTT/FLC Camera Enclosure Environmental Control
February 22, 2012, at 10:16 AM by 131.111.48.85 -
Changed lines 55-56 from:
* MRO-TRE-CAM-0000-0142 FTT/NAS Preliminary Design Report
* MRO-TRE-CAM-0000-0143 FTT/NAS Software Preliminary Design Report
to:
* MRO-TRE-CAM-1100-0142 FTT/NAS Preliminary Design Report
* MRO-TRE-CAM-1160-0143 FTT/NAS Software Preliminary Design Report
February 22, 2012, at 10:13 AM by 131.111.48.85 -
Added lines 54-57:
!!!Preliminary Design Review Documents
* MRO-TRE-CAM-0000-0142 FTT/NAS Preliminary Design Report
* MRO-TRE-CAM-0000-0143 FTT/NAS Software Preliminary Design Report
Changed lines 79-81 from:
* MRO-COR-CAM-0000-0140 June/July 2012
* MRO-COR-CAM-0000-0141 August/September 2012
* MRO-COR-CAM-0000-0142 October/November 2012
to:
* MRO-COR-CAM-0000-0150 June/July 2012
* MRO-COR-CAM-0000-0151 August/September 2012
* MRO-COR-CAM-0000-0152 October/November 2012
February 22, 2012, at 10:10 AM by 131.111.48.85 -
Changed lines 71-74 from:
* MRO-COR-CAM-0000-0127 September/October 2011
* MRO-COR-CAM-0000-0128 November/December 2011
* MRO-COR-CAM-0000-0129 January/February 2012
* MRO-COR-CAM-0000-0130 March/April 2012
to:
* MRO-COR-CAM-0000-0127 September/October/November 2011
* MRO-COR-CAM-0000-0128 December 2011/January 2012
* MRO-COR-CAM-0000-0129 February/March 2012
* MRO-COR-CAM-0000-0130 April/May 2012
* MRO-COR-CAM-0000-0140 June/July 2012
* MRO-COR-CAM-0000-0141 August/September 2012
* MRO-COR-CAM-0000-0142 October/November 2012
December 22, 2011, at 03:22 PM by jsy1001 -
Changed lines 50-51 from:
!!!Interim Preliminary Design Report
* MRO-TRE-CAM-0000-0140 FTT/NAS Interim Preliminary Design Report
to:
!!!Interim PDR Reports
* MRO-TRE-CAM-0000-0140 FTT/NAS Interim Preliminary Design Report (deleted)
* MRO-TRE-CAM-0000-0141 FTT/NAS Interim Testing Report
December 21, 2011, at 09:53 AM by jsy1001 -
Changed lines 88-89 from:
* MRO-TEN-CAM-1170-0134 Integrated Test
to:
* MRO-TEN-CAM-1170-0134 Camera Mount Test
* MRO-TEN-CAM-1170-0135 Integrated Test
December 20, 2011, at 05:33 PM by jsy1001 -
Changed lines 85-88 from:
* MRO-TEN-CAM-1170-0120 Dichroic/Flat Mirror Mount Tilt Test
* TBD Lens Displacement Test ?
* TBD Flat Mirror Piston Test
* TBD Integrated Test
to:
* MRO-TEN-CAM-1170-0131 Dichroic/Flat Mirror Mount Tilt Test
* MRO-TEN-CAM-1170-0132 Lens Shear Test
* MRO-TEN-CAM-1170-0133 Flat Mirror Piston Test
* MRO-TEN-CAM-1170-0134 Integrated Test
December 09, 2011, at 10:39 AM by jsy1001 -
Changed lines 85-88 from:
to:
* MRO-TEN-CAM-1170-0120 Dichroic/Flat Mirror Mount Tilt Test
* TBD Lens Displacement Test ?
* TBD Flat Mirror Piston Test
* TBD Integrated Test
December 09, 2011, at 10:35 AM by jsy1001 - Corrections to document identifiers
Changed lines 76-77 from:
* MRO-TRE-CAM-1120-0119 Andor iXon X3 897 Custom Clocking Evaluation
to:
* MRO-TRE-CAM-1120-0118 Andor iXon X3 897 Custom Clocking Evaluation
Changed line 84 from:
* MRO-TEN-CAM-1170-0118 Test Facility Description
to:
* MRO-TEN-CAM-1170-0119 Test Facility Description
October 20, 2011, at 05:08 PM by jsy1001 -
Changed line 76 from:
* MRO-TRE-CAM-1120-0118 Andor iXon X3 897 Custom Clocking Evaluation
to:
* MRO-TRE-CAM-1120-0119 Andor iXon X3 897 Custom Clocking Evaluation
October 20, 2011, at 02:09 PM by jsy1001 -
Changed lines 50-52 from:
to:
!!!Interim Preliminary Design Report
* MRO-TRE-CAM-0000-0140 FTT/NAS Interim Preliminary Design Report
Changed line 62 from:
!!!Monthly Reports
to:
!!!(Bi-)Monthly Reports
Added lines 70-73:
* MRO-COR-CAM-0000-0127 September/October 2011
* MRO-COR-CAM-0000-0128 November/December 2011
* MRO-COR-CAM-0000-0129 January/February 2012
* MRO-COR-CAM-0000-0130 March/April 2012
October 19, 2011, at 04:05 PM by jsy1001 -
Added line 78:
* MRO-TEN-CAM-1170-0118 Test Facility Description
October 03, 2011, at 01:55 PM by jsy1001 -
Added line 67:
* MRO-COR-CAM-0000-0126 July/August 2011
July 11, 2011, at 02:13 PM by jsy1001 -
Added line 50:
Changed lines 66-70 from:
to:
* MRO-COR-CAM-0000-0125 May/June 2011

!!!Technical Reports
* MRO-TRE-CAM-1120-0118 Andor iXon X3 897 Custom Clocking Evaluation
Added line 77:
June 29, 2011, at 04:28 PM by jsy1001 -
Added line 71:
* MRO-TEN-CAM-1170-0117 Testing Summary
June 03, 2011, at 01:49 PM by jsy1001 -
Added line 64:
* MRO-COR-CAM-0000-0124 March/April 2011
March 15, 2011, at 04:26 PM by jsy1001 -
Added line 63:
* MRO-COR-CAM-0000-0123 January/February 2011
February 16, 2011, at 12:11 PM by jsy1001 -
Changed lines 62-63 from:
to:
* MRO-COR-CAM-0000-0122 December 2010
Added lines 68-69:
* MRO-TEN-CAM-0000-0116 FTT/NAS Camera Prototype Thermal Enclosure Experiments
February 08, 2011, at 03:29 PM by jsy1001 -
Changed lines 65-66 from:
* MRO-TEN-CAM-nnnn-0114 Software Requirements for PDR-phase Testing
* MRO-TEN-CAM-nnnn-0115 Proposed Internal Messaging Scheme
to:
* MRO-TEN-CAM-1160-0114 Software Requirements for PDR-phase Testing
* MRO-TEN-CAM-1160-0115 Proposed Internal Messaging Scheme
February 08, 2011, at 03:26 PM by jsy1001 -
Changed line 2 from:
Here is the start of a product tree for the purposes of assigning document identifiers:
to:
Use the following product tree for the purposes of assigning document identifiers. A [[Attach:FTT_FLC_Product_Tree.png | detailed product tree]], with more subdivisions, is available as an attachment.
Added lines 6-13:
*** 1110 Documentation
*** 1120 Camera
*** 1130 Imaging Optics & Mounts
*** 1140 Camera Mount & Enclosure
*** 1150 Control Chassis
*** 1160 Software & Documentation
*** 1170 Test Equipment
*** 1180 Prototype Components
Added lines 15-21:
*** 1210 Documentation
*** 1220 Camera
*** 1230 Imaging Optics & Mounts
*** 1240 Camera Mount & Enclosure
*** 1250 Control Chassis
*** 1260 Software
*** 1270 Test Equipment
December 03, 2010, at 12:36 PM by jsy1001 -
Added line 13:
:TEN: Technical note (less formal than TRE, generally for internal use)
Added line 23:
Attached to [[ConceptualDesignReview]]
Added line 27:
** [[Attach:FTT-NAS CoDR report outline.pdf | Outline ]]
Added line 29:
** [[Attach:FLC CoDR report outline.pdf | Outline]]
Added line 34:
Added line 36:
Attached to [[InterfaceControl]]
Changed lines 48-51 from:
!! CoDR documents
See [[ConceptualDesignReview]].
*[[Attach:FTT-NAS CoDR report outline.pdf | MRO FTT-NAS CoDR report outline]]
*[[Attach:FLC CoDR report outline.pdf | MRO FLC CoDR report outline]]
to:
!!!Technical Notes
Attached to [[FTTPriv:TechnicalNotes]]
* MRO-TEN-CAM-nnnn-0114 Software Requirements for PDR-phase Testing
* MRO-TEN-CAM-nnnn-0115 Proposed Internal Messaging Scheme
December 01, 2010, at 03:11 PM by jsy1001 -
Added lines 7-18:

!!Document identifiers
These should be of the form "MRO-[type]-CAM-[nnnn]-[mmmm]", where [nnnn] is taken from the above product tree, [mmmm] is a unique sequence number, and [type] is one of the following:
:LIS: List or enumeration
:PLA: Plan or schedule
:TRE: Technical report
:DWG: Engineering drawing
:ICD: Interface Control Document
:COR: Correspondence e.g. memos, monthly reports
:MAN: Manual
:PRO: Procedure
To ensure that the sequence numbers [mmmm] we use are unique, please add an item to one of the lists below whenever you assign a document identifier.
November 24, 2010, at 11:50 AM by jsy1001 -
Added line 28:
* MRO-COR-CAM-0000-0121 November 2010
August 26, 2010, at 11:01 AM by jsy1001 -
Changed lines 1-2 from:
! Provisional CoDR documents
!! CoDR report outlines
to:
!!Product tree
Here is the start of a product tree for the purposes of assigning document identifiers:
* 0000 Management
* 1000 Systems
** 1100 FTT/NAS
** 1200 FLC

!!Assigned document identifiers
!!!Conceptual Design Review documents
* MRO-LIS-CAM-0000-0100 CoDR Data Package List
* MRO-TRE-CAM-0000-0101 Derived Requirements
* MRO-TRE-CAM-0000-0102 FTT/NAS Conceptual Design Report
* MRO-TRE-CAM-0000-0103 FLC Conceptual Design Report
* MRO-TRE-CAM-0000-0104 FTT/NAS Requirements Verification Matrix
* MRO-TRE-CAM-0000-0105 FLC Requirements Verification Matrix
* MRO-PLA-CAM-0000-0106 FTT/NAS & FLC Development Plan
* MRO-LIS-CAM-0000-0107 ICD List and Expected Content
!!!Interface Control Documents
* MRO-ICD-CAM-1100-0108 "FTT/NAS-FTTA" Specific FTTA-FTT interface
* MRO-ICD-CAM-1000-0109 "FTT/NAS,FLC-UTE" FTT/NAS & FLC to Enclosure ICD
* MRO-ICD-CAM-1000-0110 "FTT/NAS,FLC-NOT" FTT/NAS & FLC to optical table ICD
* MRO-ICD-CAM-1000-0111 "FTT/NAS,FLC-UT" FTT/NAS & FLC to UT optical ICD
* MRO-ICD-CAM-1100-0112 "FTT/NAS-ISS" FTT/NAS to ISS ICD
* MRO-ICD-CAM-1200-0113 "FLC-ISS" FLC to ISS ICD

!!!Monthly Reports
* MRO-COR-CAM-0000-0120 July 2010

!! CoDR documents
See [[ConceptualDesignReview]].
Deleted lines 32-36:

!! Requirements


!! Interfaces
July 09, 2010, at 01:45 PM by mf338 -
Changed lines 1-2 from:
!! Provisional CoDR documents
to:
! Provisional CoDR documents
!! CoDR report outlines
Changed lines 4-9 from:
*[[Attach:FLC CoDR report outline.pdf | MRO FLC CoDR report outline]]
to:
*[[Attach:FLC CoDR report outline.pdf | MRO FLC CoDR report outline]]

!! Requirements


!! Interfaces
July 09, 2010, at 01:41 PM by mf338 - added FTT-NAS and FLC CoDR report outlines
Changed lines 2-3 from:
*[[Attach: | MRO FTT/NAS CoDR report outline]]
*[[Attach: | MRO FLC CoDR report outline]]
to:
*[[Attach:FTT-NAS CoDR report outline.pdf | MRO FTT-NAS CoDR report outline]]
*[[Attach:FLC CoDR report outline.pdf | MRO FLC CoDR report outline]]
July 09, 2010, at 01:38 PM by mf338 -
Changed lines 1-3 from:
* Provisional CoDR documents
to:
!! Provisional CoDR documents
*[[Attach: | MRO FTT/NAS CoDR report outline]]
*[[Attach: | MRO FLC CoDR report outline]]
July 09, 2010, at 01:31 PM by mf338 - started page content
Added line 1:
* Provisional CoDR documents
Recent Changes (All) | Edit SideBar Page last modified on August 02, 2017, at 05:01 PM Edit Page | Page History
Powered by PmWiki